Analysis of sand making machine failure in working hours
Posted to reciperate.com by Richarder
 
sand making machine
 
The crushing machine is working, it just stops running without reason, and I have to cut off the power at once in order to prevent the motor from being burned out. Said a crusher operator of an ore beneficiation plant. He said that if you have no idea of the temper of the crusher, the crusher will often stop working with no reason. For this reason, when the crusher is crushing materials, it is important to pay attention to the uniformity of the feeding materials, and also to the harness of the materials. If the materials are too hard, an additional procedure may be added. Then what are the factors that influence the working process of the sand making machine? Generally speaking, the main factors influencing the work of the jaw crusher are the nip angle and the revolution number. Nip angle is the intersection angle between the movable jaw and the fixed jaw. According to the calculation, the biggest nip angle can reach 32. However, in the actual use, it is often small than 25, and generally between 18 and 20. If the nip angle is too big, the rocks in the crushing chamber will be squeezed out and damage the workers or other equipment, and at the same time, the production efficiency will decrease with the increase of the nip angle or the crushing ratio. To adjust the size of the rock discharging mouth is to change the size of the nip angle. In the daily practice, the mining machinery manufacturing company often adjusts the rock discharging mouth according to the requirement of the granularity of the discharged products. For this reason, on the condition of guaranteeing the product granularity, it is reasonable to maximize the rock discharging mouth. The size of the rock discharging mouth can be adjusted through the adjusting wedge. In addition, when the worker adjusts the size of the discharging mouth, he should pay attention to the mutual relationship of the crushing ratio and the production efficiency. Within a certain range, increasing the revolution number of the eccentric shaft will be able to improve the production ability of the crushing equipment. However, it will also increase the electricity consumption crushing unit weight rocks. If the rotary speed is too high, the rocks that have been crushed in the crushing chamber may have no time to be discharged, and they will block the discharging mouth, and then the production ability will be decreased and the electricity consumption will increase. For this reason, it is necessary for the jaw crusher to have a proper rotary number. The eccentric shaft, connecting roc, movable jaw plate, bearing and the lining board of the jaw crusher are the main easy-wearing parts, which need regular lubrication and change. After seeing the explanation of the common malfunctions of jaw crusher, we can clearly know that we can use the above methods to eliminate the breakdowns when there is something wrong with the crusher in the future. As a professional and the best mining machinery manufacturer in China, SBM Machinery is always ready to provide the superior rotary kiln with the best quality and the most competitive price.
Recipe Summary
Yield: Select
Prep time: Under 15 Minutes
Cook Time: Under 15 Minutes
Course: Select