Double-click the crusher is also called dual-rotor hammer crushing machine, designed for quarry crusher
production line equipment, the machine is suitable for calcite, limestone, brick cinder, slag, slag, shale, coal gangue, construction waste, construction Waste materials such as crushed, solved with gangue, coal cinder brick factory add material, the fuel; with waste rock, shale production standard bricks, hollow brick material crushing humidity problems. The machine is equivalent to two hammer to break into one reasonable combination as a whole, the two sets of rotor series.
Double-click the crusher working principle of: work, driven by dual motors, each series of two high-speed rotation of the rotor at the same time, the material in the machine immediately lower rotor cavity rapid rotation of the hammer was crushed by the higher rotor again crushing cavity material collide with each other rapidly, crushing each other, to hammer powder, the powder material effect, the formation of the expected size of less than 3 mm cinder particles. This granularity fully able to meet through the brick factory as a source of internal combustion brick requirements.
1 Double-crusher by two consecutive double-rotor broken, no screen bar equipment, all kinds of wet residue can be broken, both fish out of water can be broken at any time, there is no bonding clogging, only need to adjust the size of the control of the material what can hammer crushing gap between. General crusher because materials in the crushing cavity retention caused by blockage, resulting in increased wear-related parts, double-crusher completed to avoid the above phenomenon.
2, high wear-resistant alloy hammer. Hammer hammer handle used in combination with a change of hammer, hammer handle does not change.
3, the unique displacement technology transfer gap, hammer wear and tear without repair, repeated use of mobile location, a hammer top three hammerhead.
4, crusher bidirectional rotation, through continuous two-way operation, such as the frequency, it can even wear between the hammer and the broken tooth plate, reducing the frequency of replacement of wearing parts downtime.
5, a uniform particle size, large crushing ratio, high output, low energy consumption, 20 tons of material per hour over the broken, broken cinder cost per ton of not more than 1.8 yuan.
6, suitable for crushing brittle materials, non-blocking, low dust, low noise. 7, shortening the time of materials in the crushing cavity retention, increase the service life of wearing parts.
8, easy installation, greatly improving the degree of freedom of the device.
9, maintenance fast, double-click on the upper side of the wicket crusher can put sex open, allowing the crusher maintenance and replacement of wearing parts become faster and easier, reducing maintenance time.
10, electric - hydraulic operation, a person can easily complete this machine operation, maintenance, replacement parts.