A few notes in using ore milling equipment

recipe icon
ore milling equipment

Yield: Select
Prep time: Under 15 Minutes
Cook Time: Under 15 Minutes
Course: Select

Ingredients:
Instructions:
The ore milling equipmentis common ore milling equipment widely used in industrial production, which is mainly used in mining, smelting, building material, high, railway, water conservancy and the chemical industry sector. The ore milling equipment in our country develops slowly and the efficiency of the ore milling equipmentis very low. In order to improve the efficiency of the crusher and achieve energy saving in crushing field, it is necessary to have a deep study on ore milling equipment. There are lots of factors to influence the performance of the ore milling equipment, including the structure of the ore milling equipment, the operational factors and so on. These factors have different impact on the performance of the ore milling equipment, such as the efficiency of the ore milling equipment, the particle size of the products and the energy consumption. Therefore, it is necessary to establish a multi-objectives optimization model to optimize the performance of the ore milling equipment. The operator must observe and note the followings to ensure the good performance of the ore milling equipment. First, the feeding ore must be uniform and the sizes of the products must meet the requirements. Second, pay attention to the ore discharge and the operating condition of the transport belt to avoid the clogging accident. Third, regularly check the pumps, coolers, filters, the amount and temperature of the fuel. The fuel return temperature should be less than 60 Forth, check the drainage. Do not operate the machine without water. Fifth, pay attention to the oil pressure of the locking cylinder. The adjustment ring only can be operated in locking status. Sixth, regularly check the wear of the liner. In particular, pay attention to the retaining bolt of the liner.

Posted by Richarder

You must be logged in to post a comment.