How to effectively control sand making machine dust

recipe icon
How to effectively control sand making machine dust

Yield: Select
Prep time: Under 15 Minutes
Cook Time: Under 15 Minutes
Course: Select

Ingredients:
Instructions:
Due to the working principle and nature of the sand making machine, we know that in the daily work, it is unavoidable that the sand making machine produces dust. The production of a large amount of dust will not only destroy the ecological environment of the local production site, but also affect the health of long-term staff members who work in the field. Moreover, once the dust is accumulated excessively, the working efficiency of the equipment will be greatly reduced and it will aggravate Equipment internal parts wear. Therefore, dust control sand making machine is particularly important. Although we can not completely cure the dust, we can reduce the dust generation as much as possible. So how to effectively control sand dust machine? First, the source of dust control, minimize the amount of dust generated. Only effective control of dust sources can fundamentally reduce the problem of dust pollution, which is divided into two kinds of methods. Dust extraction as the first point, the inlet and outlet is the origin of dust, the two effective sealing and then install the fan to carry out dust removal, in the very good treatment, this can be done on the dust source to control the proliferation of dust, It is also a relatively effective method. The second is to improve the production process of sand production line. During the work of sand-making equipment or crushing equipment, the appropriate improvement of the production process, such as the screening process using multiple screens, more processes out of the material will be more pure, but also reduce the amount of dust, The resulting pollution will also be reduced. At the same time can also reduce the damage of dust on mechanical equipment parts. Second, to effectively deal with the spread of dust. If dust is not controlled from the source of sand-making equipment, how can we prevent the spread of dust? Which can be divided into two specific points, the first is to reduce the speed of material discharge. After the material is processed by the sand making equipment, it is discharged from the discharge opening. The force will diffuse the dust into the air rapidly. If the material flow rate can be properly reduced, the dust spreading can be avoided too fast. However, the drawback is that the slowdown of the discharge port is directly related to the production efficiency. The second point is watering. Watering has become a daily task in major cities, especially in areas with large human traffic. Watering can be used to improve the quality of the environment. Dust, dust and other substances will be dissolved in water, sand production line in the venue and the surrounding water often, but also can effectively reduce the dust flying around. The production of modern industrial machinery more or less will bring some pollution, but because of this, all the manufacturing enterprises should make more efforts to change the status of production, the implementation of green sand. Although the dust generated in the process of sand making sand is unavoidable, it can be reduced to a certain extent.

Posted by xiaoxiaoxuan

You must be logged in to post a comment.